Automatic Screw Locking Machines Were Accepted By The Market

Date：2024-05-18 

Automatic screw locking machine is one of the products that processing and manufacturing companies attach great importance to at present. First, most products require screw locking to achieve the purpose of product maintenance. However, different screw specifications and locking This method has a great impact on the locking efficiency of the screws. Generally, manual locking of large screws can also be done, but for small screws such as PCB circuit boards, these small product locking screws are sealed on the mobile phone. Sometimes, because the size of the screw is too small, the operator cannot accurately control the direction and angle of the screw, resulting in low locking efficiency. At this time, the automatic screw locking machine has become one of the indispensable auxiliary software. At this stage, In the sales market, automatic locking screw machines have been generally accepted by the sales market.
Automatic Screw Locking Machines Were Accepted By The Market

To distinguish the appearance of the air-blowing screw machine from the suction-type screw machine, you usually only need to see whether the screw machine is equipped with a sorter, as shown in the figure: the sorter in the red box on the left mainly has a screw sorting function and is convenient for the screwdriver head to pick up screw.
The automatic screw-locking machines manufactured by Fushida Automation Technology are divided into air-blowing automatic screw-locking machines and suction-type automatic screw-locking machines according to the screw transportation method. The suction-type automatic screw locking machine uses the magnetic suction function to suck up the screws. The advantages of being fixed to the corresponding screw hole position for locking are:
1. The screw type is highly acceptable
Air-suction screws have lower screw requirements, especially the cap diameter ratio that air-blowing screw machines need to consider (air-blowing screw machines are suitable for screw cap diameters less than 1.2), and air-suction screws are not used.
2. Accurate torque value
The torque value of the screw machine is a parameter calculated after several adjustments. It is highly accurate and prevents the lock from being too loose or using too much force, causing the screw to rivet and affect subsequent use.
LAST：Steps to Order Automatic Screw Locking Machine
NEXT：Manufacturing adjustment methods for automatic screw machines ...

Relevant

  • Steps to Order Automatic Screw Locking Machine
  • Automatic Screw Locking Machines Were Accepted By The Market
  • Manufacturing adjustment methods for automatic screw machines ...